Why Do Scientists Study Water Quality?
Rising sea levels and increasing average global temperatures due to climate change are threatening the quality of water that is essential to ecosystems across the globe. Scientists study data such as pH, electrical conductivity (EC), and temperature from samples of different water sources to better understand the effects that climate change may have on the quality of water.
What's in the Kit?
- 1 distilled water wash bottle
- 1 empty water bottle with cap
- 1 pack of pH paper
- 2-3 glass vials with caps
- 1 HANNA DiST TDS meter
- 1 mini GPS location finder
- 1 USB charging cable
- 1 instructions packet
- 1 sharpie
- 1 eraser
- 1 observation journal
- 1 pair of gloves
- Safety rules
Relevant Sustainable Development Goals (SDGs)
How to Help Scientists Collect Data?
- Go to the mWater website and click on Sign Up to create an account.
- Use the Mini GPS Location Finder in the kit for location coordinates and elevation information. Press and hold the middle button to turn on the GPS and give it 8-15 minutes to connect to a satellite. Once it is connected, the screen will display a signal icon with bars and a blinking black bullet. Press the top button three times to see coordinates and two more times to see the elevation information measured in meters. Press and hold the middle button to turn the GPS off.
- Use the data card and the Sharpie in the kit to record your observations.
Collecting and Surveying Water Samples
Step 1
Fill the clear 250 mL bottle in the kit with water from the source you want to sample (e.g. faucet, hose). To test water from additional sources, fill the glass vials in the kit for sample collection.
Step 2
Immerse 1 pH testing strip into the water sample for up to 2 seconds and then remove. Shake off excess liquid. Wait 10 seconds and then compare the colors produced on the indicator pads with those on the color chart before the indicator pads dry. Record the pH value that contains colors that best reflect the colors that are on the strip. Keep all unused pH testing strips in the original packaging.
Step 3
Record the pH value on the data card using the Sharpie included the kit (marking is erasable using the included eraser).
Step 4
Turn on the TDS meter in the kit and dip the meter probe into the filled bottle (included) or a paper cup (not included) that contains the water sample. You will use TDS meters to test Total Dissolved Solids (TDS) in parts per million (PPM), and Electrical Conductivity (EC). Conductivity of water is important because it reveals water's salinity and the concentration of other minerals and contaminants. Record the values that appear on the display on the data card.
Only use the TDS meter for freshwater testing. Do not use it to test ocean/saltwater.
Step 5
Return to the mWater website and input and submit the data you collected.
Useful Tip
If you prefer to submit your observation data anonymously, go to Observation Anonymous, and select Monitoring Water Quality to access the observation form. Complete all fields on the form then select Submit.
Step 6 - Cleaning
Drain the water sample in the collecting bottle or vials. Use the included distilled water to rinse the bottle and vials. Leave the cap off of the vials and bottle to dry. Place the caps back on the dried bottles and vials and put them back into the kit bag along with other equipment and materials that need to be returned.
Rinse the probe of the TDS meter in tap water only to neutralize the acidic fluid that was tested. Do not rinse it with distilled water.
Step 7
Complete our survey and return the kit to the library so someone else can contribute.